Winter Heating Gloves EKOI HEAT CONCEPT 3

Your order will be shipped tomorrow

£67.33 £134.68
In stock
We welcome your feedback !
Shipping and returns

Free returns Except during official French sales periods : Returns policy
Shipping information to : France

At home
Colissimo France
Delivered between 26/02 and 28/02
48/72h to your door or at the post office
Price : £5.01
UPS Standard ®
Delivered between 25/02 and 27/02
For any order placed before 12.00, delivery in 1 to 3 days.
Price : £6.68
From a pick-up point
Mondial relay
Delivered between 28/02 and 02/03
Delivery in a pick-up point of your choice in 4 days.
Free delivery starting from £33.45 purchase
Price : £4.17
UPS Standard ® Access Point
Delivered between 26/02 and 28/02
For any order placed before 12.00, delivery in 1 to 3 days.
Free delivery starting from £66.92 purchase
Price : £5.85

It's the perfect glove to fight cold (up to -20 °). The glove is waterproof, breathable & specially designed by EKOI to cycle in winter.

The temperature control knob allows you to regulate the degree of heat & a charge indicator allows you to manage your battery life.

- Efficient down to - 20 °.
- 3 temperature levels with adjustment switch :
- 1 pressure: RED LED 40 ° (autonomy of 1.5 hours maximum).
- 2 successive pressures LED ORANGE 35 ° (autonomy of 2.5 hours maximum).
- 3 successive GREEN LED 30 ° (autonomy of 4 hours maximum).

- Indicator for charge level of the battery
(4 red bars = 100%)
(3 red bars = 75%)
(2 red bars = 50%)
(1 red bar = 25%)

- Waterproof and breathable membrane to effectively fight against cold & humidity.
- Soft, non-slip palm for perfect handlebar support.

- Effective down to - 20 °
- Road or MTB

We advise you to preheat your gloves in GREEN mode, without putting them on for 3 minutes before going on the road so that your hands are warm from the beginning of your ride ; then we advise you to keep the GREEN mode until you feel cold. If you start to get cold fingers go to orange then red if cold is felt again

Press + 3 seconds to turn on/off the heater.

Upon your return we advise you to put your batteries back in charge (around 2 to 3 hours) in order to anticipate your next winter ride.

- Palm:
- Synthetic coating: easy maintenance / durability / flexibility.
- Anti-slip silicone inserts for perfect grip of the handlebar in dry weather or in the rain.

Glove top:
- Internal waterproof & breathable membrane
- Frills at cuffs to avoid air in
- Velcro closure.
- Closure with elastic strap for a better fit of the glove.
- Palm with non-slip silicone inserts
- 4 sizes: S / M / L / XL

- Removable rechargeable batteries (Supplied with main charger).

CAUTION: IT IS IMPERATIVE TO USE ONLY THE CHARGER provided with the product to charge your batteries. We do not accept any liability for failure to comply with this rule.
- 2 year warranty gloves and batteries.

- Top: 94% polyamide and 6% elastane.
- The palm: 50% polyester and 50% nylon.
- The lining: 100% polyester.

- INPUT AC100 / 240V charger (50 / 60Hz-1.0A)
- OUTPUT DC8.4V / 1200 mA charger
- 7.4 V lithium polymer batteries: LI -PO 2200 ah
- DCP: DC 8,4V 1200mA
- MAX output power 15W

To ensure maximum battery life, the batteries must be fully charged & stored in a dry place at room temperature.

In case of heavy rain we advise you to turn heating off

For the maintenance we recommend cleaning with a damp cloth & sponge after removing the batteries.

Do not use a washing machine.

Need some help on sizing? We’re on hand to advise as required, contact us.
44 7508017213





< 8 S
8 à 9 M
9 à 10 L
10 à 11 XL

Use instructions :

- In case of rain we do not recommend using the heating system.

1) It is necessary to fully charge the batteries before the first use

- Plug in the charger (the charging LED lights GREEN)

- Then connect the 2 batteries to the charger, the charging starts automatically and the charging light stays on during charging. (The LED turns RED this indicates that your batteries need to be charged)

2) The charging time is approximately 2 to 4 hours depending on the charge level of the battery.

- When the battery is fully charged, the charging stops automatically and the LED of the charge indicator turns GREEN.

3) Disconnect the batteries from the charger & reconnect the batteries to the glove connector, place each battery in the designated slots and close the pouch correctly. 4) Press + for 3 seconds to switch the heating system on or off.

- TURN on your gloves without putting them on for 3 minutes before going so that the gloves warm up & your hands are perfectly protected from the cold during your ride.

- We advise you to start your output in GREEN mode and switch to ORANGE then RED mode as you feel that the outside temperature drops.



- In case of rain we do not recommend using the heating system.

- DO NOT LOAD HEAT CONCEPT items with ANY OTHER charger than the one supplied.

- DO NOT INSERT metal or other objects into connectors or receptacles as this may damage HEAT CONCEPT articles.

- DO NOT BRING modifications to HEAT CONCEPT products (gloves or shoe covers).

- NEVER remove the protective film from the batteries

- you risk an explosion if the polymer batteries are not handled properly. We decline all responsibility in case of non-compliance with these rules.

  • Technology : Warming
  • Temperatures : -20°
Add my feedback
1 2 3 4 5